There are 1000s of people that download from this site but dont have an account so likely many of your downloads are from those people and they have no way to reply to you.
I used the neighbours cat to mop the floor.
It worked good!
The damn thing spazes out so much being soaked and tied to the end of a stick that minimal effort is used to create a scrubbing action.
I suggest trying it
Lift may be fixed by adjusting the trim angle. Or even hiding another wing inside to negate the action.
Engines can be nerfed by blocking the intakes with a cap that you color invisible for looks.
@urownpersonalgod
Maybe add some pistons with hinge points to add stability.
Being a sandbox craft you should be able to paint them invisible and make them weight less with no drag.
Terrible option but its possible to get the job done.
Another way is to just place the turbine where you wish. Then use the Part Connection Tool to choose what part you wish to connect it to.
Be sure to turn auto resize off so the new parts dont match the old parts size and dimensions.
Look at the cargo drone built. Parts really dont even need to be near anything to actually connect. Its a bit of a cheat if you ask me but im lazy in career mode so i do it.
You could math it in vizzy but I just repeated the challenge until I found the right path.
The biggest thing to keep in mind is having a breaking system.
Aim to over shoot it in map view.
Then pull parachute.
Youll see how your falling path changes in map view.
Use engines to break and push you on target.
Well, theres a mirror option somewhere. Find that in the tabs.
Tricky part is understanding what your mirroring.
If you mirror the craft itself, you will be copying one side and printing it to the other side.
If you do the wrong side just click undo.
Now
If you are trying to mirror parts then it can get weird.
Sometimes youll end up with a messed up look.
Basically it will mirror everything in the same branch that the parts are connected to.
So for example, say you are making an octopus and trying to mirror individual legs from one side to the other.
If you mirror a part half way down the leg then youll only copy and paste half of the leg.
Just mess with mirroring until you understand it. Its the best way.
Use a craft you dont care about or be sure not to save it.
@Zenithspeed I suggested it a couple times but it gets shrugged off for some reason.
Im sure it could be done and just have an option to turn it off in graphics for mobile potatoes.
@Zenithspeed
Sounds tight dude!
I wish terrains had different effects like traction and drag.
Slippery snow/ice or sand that drags could make things so much more real.
@Ammarared
Just keep trying and you will eventually get it.
The trick is having enough thrust to slow down in time.
T.T. Is so light and small that you often sail right through the SOI and out the other side.
Add an extra stage to your rocket in hopes to slow down enough to catch an orbit.
@Zenithspeed
Yes a good trick indeed.
I was just trying to find an answer for @ColonelStriker
The clipping would be necessary to create the effect desired in the first concept.
Probably by clipping the engine and air intake with another part but it will be hard to fine tune.
Often times when people build jets they mess up and overlap a part on the engines or air intakes.
The result is a less powerful engine.
I believe there is only so far you can clip the parts before the engine stops working all together.
So you’ll get maybe a 50% decrease in thrust but clip any more and it just stops working.
Probably the best structured title since my posts. ..
+1 4 months agoThere are 1000s of people that download from this site but dont have an account so likely many of your downloads are from those people and they have no way to reply to you.
+1 4 months ago🎣🎣🎣🎣
+1 5 months ago@BmnkRocketIndustries grandma is hiding her excitement. Hoping youll go outside to play.
+1 5 months agoDo her a favour and go clean the house.
Make her supper.
@Mahaees
+1 5 months agoIm just assuming that using this platform to advertise goods or services they might delete the video.
Youre good as long as no negative stuff basically.
+1 5 months agoMight not be able to advertise or something but not sure
@BmnkRocketIndustries
+1 5 months agoI did not get a notification for the everyone tag. That must have been when I was visiting the next dimension.
Admin accepted name change.
+1 5 months agoI used the neighbours cat to mop the floor.
+1 6 months agoIt worked good!
The damn thing spazes out so much being soaked and tied to the end of a stick that minimal effort is used to create a scrubbing action.
I suggest trying it
@Cosmonaut720
+1 6 months agoNo flights heading directly to hell.
Must book multiple flights
@Simplestupid sorta.
+1 6 months agoIt explodes a bit too lol.
Decompression in both directions.
Also crew compartment will implode if used in space.
+1 6 months agoCoyotes howled as I read this
+1 6 months agoWhile beacon light, toggle switch or engine is active. Do something.
+1 6 months agoYou are limited to you're imagination.
While AG 10 is active,
+1 6 months agoSliders 1-4 become #7 priority
Else resume regular flight
Do you like dags?
+1 6 months agoEvery sexy alien needs a good set of hips to prove she can survive a few births.
+1 6 months agoLift may be fixed by adjusting the trim angle. Or even hiding another wing inside to negate the action.
+1 7 months agoEngines can be nerfed by blocking the intakes with a cap that you color invisible for looks.
@urownpersonalgod
+1 8 months agoMaybe add some pistons with hinge points to add stability.
Being a sandbox craft you should be able to paint them invisible and make them weight less with no drag.
Terrible option but its possible to get the job done.
Another way is to just place the turbine where you wish. Then use the Part Connection Tool to choose what part you wish to connect it to.
+1 8 months agoBe sure to turn auto resize off so the new parts dont match the old parts size and dimensions.
Look at the cargo drone built. Parts really dont even need to be near anything to actually connect. Its a bit of a cheat if you ask me but im lazy in career mode so i do it.
You could math it in vizzy but I just repeated the challenge until I found the right path.
+1 8 months agoThe biggest thing to keep in mind is having a breaking system.
Aim to over shoot it in map view.
Then pull parachute.
Youll see how your falling path changes in map view.
Use engines to break and push you on target.
Anomaly
+1 8 months agoHotups are what you need to be careful of
+1 8 months agoThere could be a good 20 days between those
+1 8 months agoI think people forget about foxtrot too so dont feel too bad.
+1 8 months agoWell, theres a mirror option somewhere. Find that in the tabs.
Tricky part is understanding what your mirroring.
+1 8 months agoIf you mirror the craft itself, you will be copying one side and printing it to the other side.
If you do the wrong side just click undo.
Now
If you are trying to mirror parts then it can get weird.
Sometimes youll end up with a messed up look.
Basically it will mirror everything in the same branch that the parts are connected to.
So for example, say you are making an octopus and trying to mirror individual legs from one side to the other.
If you mirror a part half way down the leg then youll only copy and paste half of the leg.
Just mess with mirroring until you understand it. Its the best way.
Use a craft you dont care about or be sure not to save it.
You need a better space ship.
+1 9 months agoTry food themes.
+1 9 months agoThen do super heros home planets
Then maybe do the entire real universe to scale.
Tell it to wait 0 seconds between every thought.
+1 9 months agoThen cook an egg on your gpu
@Zenithspeed I suggested it a couple times but it gets shrugged off for some reason.
+1 11 months agoIm sure it could be done and just have an option to turn it off in graphics for mobile potatoes.
@Zenithspeed
+1 11 months agoSounds tight dude!
I wish terrains had different effects like traction and drag.
Slippery snow/ice or sand that drags could make things so much more real.
@MirazAerospace
+1 11 months agoSquishy rocket parts. Like air bags to absorb hard landings
Id like to see something squishy too
+1 11 months agoThat was 5 mins worth of screen shots
+1 one year agoVery honourable
+1 one year agoWar planes, Space planes, Interdimensional planes.
+1 one year agoGot to play the right music.
+1 one year ago@AngryScientist ok i dont know how to help then sorry man
+1 one year ago@EpsilonSpaceOrganization
+1 one year agoThe mods will switch them for you is all.
They will welcome your enthusiasm though.
Click the droods info box and go to your list of hired droods.
+1 one year agoIf none hire some.
@Rithiksaran
+1 one year agoBottom inlet is getting heat damage from the rocket exhaust.
Pull it up out of the way or tinker it to be invincible.
@RichGWall
+1 1.1 years agoGood work introducing techniques to slow down first.
I thought they were not deploying at all.
Deploy height?
+1 1.1 years agoA working type writer with reloadable paper.
+1 1.1 years agoSometimes the color you paint it can hide the light.
+1 1.1 years agoTry a flat finish and nothing too dark
No wings
+1 1.2 years ago@Ammarared
+1 1.2 years agoJust keep trying and you will eventually get it.
The trick is having enough thrust to slow down in time.
T.T. Is so light and small that you often sail right through the SOI and out the other side.
Add an extra stage to your rocket in hopes to slow down enough to catch an orbit.
@Zenithspeed
+1 1.2 years agoYes a good trick indeed.
I was just trying to find an answer for @ColonelStriker
The clipping would be necessary to create the effect desired in the first concept.
Probably by clipping the engine and air intake with another part but it will be hard to fine tune.
+1 1.2 years agoOften times when people build jets they mess up and overlap a part on the engines or air intakes.
The result is a less powerful engine.
I believe there is only so far you can clip the parts before the engine stops working all together.
So you’ll get maybe a 50% decrease in thrust but clip any more and it just stops working.
8 trillion Robux have been rewarded to your account!
+1 1.2 years agoPlease take a minute to fill out our survey.