@Tweedle_Aerospace it’s not rcs and gyro that is the problem, it is the fact that when the pitch is constantly changing, the rocket will just hover on a pitch in the middle.
@Tweedle_Aerospace I never thought to trace fuel tanks. That is a cool idea. The way I did it was I made one “slice” of wall for every side of the fuel tank at the bottom (if you look closely, the fuel tanks are not actually circular on the sides. There are just many short straight lines.) I then made increasingly smaller pieces on top of each other curving into the middle, then I radially cloned it around the whole thing.
@Chtite451SR2 I used cargo bays for my jet, but when I made a capsule with interior I wanted to be able to add windows and a hatch, so I used panels. Panels are better for more detail.
@LostHoosier originally you did have to have an external keyboard, but now if you go to the controls menu in settings and you click the three dots in the top right corner you will see the option to open dev console. Then you can just start to type planet studio and it will pop up. Click on it then press execute. Then you will be in planet studio. There is really no point in using planet studio right now though, since there is not much you can do yet. (I have not tried it since the last update, so maybe there is more now)
@LostHoosier probably. You can already get in to the planet studio with no keyboard on mobile. I just can not figure out how to do anything yet since it is not done
@Insanity thanks! I want to do a boost back burn before I start the upper stage code. Do you know if the upper stage will wait to use the code until I switch to it if I use a broadcast block?
I think a Novo v4 would be cool, but so would a new rocket. All I can say is that you should add launch pads. The one you made on your Novo crew lift was amazing.
@Tweedle_Aerospace yeah I had that problem too, but in the times I tried it it still worked so I left it. I also did not expect my code to be used so I did not spend very long optimizing it.
@Tweedle_Aerospace ok- I have a version of the pre-release you made almost done. It is equipped with my program but you can change that if you want- I just did it because for some reason with the settings I have my game on the rocket always blows up at stage separation with your program.
My rocket
JSO 175,000kg auto launch: https://www.simplerockets.com/c/4M08r5/175-000kg-auto-launchupdate
Edit: new version:
JSO 225,000kg auto launch:
https://www.simplerockets.com/c/CyN9af/225-000kg-auto-launch
@Gen3ralInterstel1ar it would be so cool but how would it work with warp? They should add multiplayer to SimplePlanes (if they don’t have it already on pc, I don’t know since I’m on mobile)
@zzazza @Gozinya I came up with a new theory: following the 1s pattern for the dev notes posts, they missed the 21st and the 01st. The digit in the 10s place of these numbers added together is 2, so now we take the digits in the 10s place of the first 2 post dates, which is 2 and 3. If we add those together we get five, so obviously the update comes out in 5 minutes.
@Gozinya I hope it means October 1st 2020! I’ve been waiting for this update for so long, I understand that it takes a while but I want it so badly! I also agree with @WereOutOfNamesArentWe that however many days extra it takes them to release this, that is how late the update will be, for example, if following the pattern, than right now it would be 4 days late, so it would come out on October 5th.
@MSCSpaceworks It worked! I did not even have to get rid of the game, just take the game states folder out of the SimpleRockets 2 folder so it automatically generated a new one- it must have been stuck in that last flight of mine- by getting rid of that last flight’s file I must have fixed it- I even was able to put the files back after opening the game- nothing at all was lost!
@plane918273645 so will it work if I just copy the entire craft design folder and put it out of the SimpleRockets 2 folder? Are there any other files I need for the crafts? Also will this work for subassemblies too?
Does anyone know if in files I go to SimpleRockets 2 - userdata - craftdesigns and copy the craft files I want to save into a different folder, than delete and reinstall SimpleRockets 2 and copy the files back into the craft design folder, will I have the crafts or do I need to save more files or is it just not possible? Or if I just copy the whole craftdesigns folder?
Does anyone know if in files I go to SimpleRockets 2 - userdata - craftdesigns and copy the craft files I want to save into a different folder, than delete and reinstall SimpleRockets 2 and copy the files back into the craft design folder, will I have the crafts or do I need to save more files or is it just not possible?
@MSCSpaceworks thanks! Do you know of any way to save some of the craft files before doing this? I have many crafts that are not posted that I do not want to loose
@Tweedle_Aerospace it is not a bug, the rocket is just constantly trying to go to both pitches so it stays in the middle
3.5 years ago@Insanity I tried, but it still does not seem to work
3.5 years ago@Tweedle_Aerospace it’s not rcs and gyro that is the problem, it is the fact that when the pitch is constantly changing, the rocket will just hover on a pitch in the middle.
3.5 years ago@Tweedle_Aerospace I do not know how much this will help, but try turning up stability modifier in advanced part settings on your hinge rotators.
3.5 years ago@Tweedle_Aerospace I never thought to trace fuel tanks. That is a cool idea. The way I did it was I made one “slice” of wall for every side of the fuel tank at the bottom (if you look closely, the fuel tanks are not actually circular on the sides. There are just many short straight lines.) I then made increasingly smaller pieces on top of each other curving into the middle, then I radially cloned it around the whole thing.
+1 3.5 years ago@Chtite451SR2 I used cargo bays for my jet, but when I made a capsule with interior I wanted to be able to add windows and a hatch, so I used panels. Panels are better for more detail.
+1 3.5 years ago@LostHoosier originally you did have to have an external keyboard, but now if you go to the controls menu in settings and you click the three dots in the top right corner you will see the option to open dev console. Then you can just start to type planet studio and it will pop up. Click on it then press execute. Then you will be in planet studio. There is really no point in using planet studio right now though, since there is not much you can do yet. (I have not tried it since the last update, so maybe there is more now)
+1 3.5 years agoDoes this mean career mode will happen?
3.5 years ago@LostHoosier probably. You can already get in to the planet studio with no keyboard on mobile. I just can not figure out how to do anything yet since it is not done
3.5 years ago@Insanity ok. Thanks!
3.5 years ago@Insanity thanks! I want to do a boost back burn before I start the upper stage code. Do you know if the upper stage will wait to use the code until I switch to it if I use a broadcast block?
3.5 years agoI think a Novo v4 would be cool, but so would a new rocket. All I can say is that you should add launch pads. The one you made on your Novo crew lift was amazing.
+1 3.5 years ago@FireBirdAerospace I am pretty sure it is. I was able to download it from the App Store.
3.6 years ago@ScorpionSpace @Tweedle_Aerospace I play on iOS and I already have it.
3.6 years agoYES!
3.6 years ago@Tweedle_Aerospace yeah I had that problem too, but in the times I tried it it still worked so I left it. I also did not expect my code to be used so I did not spend very long optimizing it.
3.6 years agohere is the rocket. It is just painted differently and has booster separation motors
3.6 years ago@Tweedle_Aerospace ok- I hope to have the rocket done by tomorrow.
3.6 years ago@Tweedle_Aerospace ok- I have a version of the pre-release you made almost done. It is equipped with my program but you can change that if you want- I just did it because for some reason with the settings I have my game on the rocket always blows up at stage separation with your program.
3.6 years ago@Tweedle_Aerospace ok.
3.6 years ago@Gio2020ITA I don’t do things like that. I only want people to follow me if I deserve it and I only follow people who deserve it.
3.6 years ago@Gio2020ITA Thanks! @Chtite451SR2 just showed me how to do it.
+1 3.6 years ago@Tweedle_Aerospace Nice! Can you post the rocket so we can see the design?
3.6 years agoThis is my rocket. If I have time I plan to add a launch mount and make it look better.
3.6 years ago@Chtite451SR2 I’ve decided to call the mini one Bullet because it looks and acts more like a bullet. I will call the big one Phoenix.
3.6 years ago@Chtite451SR2 I also thought of another: Phoenix. I can’t decide between Bullet and Phoenix.
3.6 years ago@Chtite451SR2 ok I will. Thanks again for the name suggestion!
+1 3.6 years ago@Chtite451SR2 I’m making a mini version, going to call it Bullet Mini- do you want me to credit you for the name on the post?
3.6 years ago@Chtite451SR2 I like it. Thanks! (@SNSA sorry I’m not using you name I just don’t really understand it)
+1 3.6 years ago@BrTommygun sorry it took me so long to respond! I will try that. Thanks!
3.6 years ago@Chtite451SR2 I mean like a post on the sr2 website
3.6 years ago@Tweedle_Aerospace It does not really matter what it is called- just put a link to it in this post so we can find it.
3.6 years ago@Chtite451SR2 @Tweedle_Aerospace would it be possible to do it on this post or make a new one for it?
3.6 years ago@Chtite451SR2 I don’t have discord :(
3.6 years ago@Chtite451SR2 it’s so hard because if you ever think of a name you can scroll through crafts for a few minutes and find a craft with the same name
+1 3.6 years ago@Tweedle_Aerospace thanks!
3.6 years agoMy rocket
3.6 years agoJSO 175,000kg auto launch: https://www.simplerockets.com/c/4M08r5/175-000kg-auto-launchupdate
Edit: new version:
JSO 225,000kg auto launch:
https://www.simplerockets.com/c/CyN9af/225-000kg-auto-launch
@Gen3ralInterstel1ar it would be so cool but how would it work with warp? They should add multiplayer to SimplePlanes (if they don’t have it already on pc, I don’t know since I’m on mobile)
+1 3.6 years ago@Gozinya I’m getting really confused. It’s been much more than 5 minutes. Why is the update not out?
+1 3.6 years ago@zzazza @Gozinya I came up with a new theory: following the 1s pattern for the dev notes posts, they missed the 21st and the 01st. The digit in the 10s place of these numbers added together is 2, so now we take the digits in the 10s place of the first 2 post dates, which is 2 and 3. If we add those together we get five, so obviously the update comes out in 5 minutes.
3.6 years ago@zzazza I’m just going to ignore that comment and keep telling myself it will be October first... I want this update so badly!
+1 3.6 years ago@Gozinya I hope it means October 1st 2020! I’ve been waiting for this update for so long, I understand that it takes a while but I want it so badly! I also agree with @WereOutOfNamesArentWe that however many days extra it takes them to release this, that is how late the update will be, for example, if following the pattern, than right now it would be 4 days late, so it would come out on October 5th.
3.6 years ago@MSCSpaceworks It worked! I did not even have to get rid of the game, just take the game states folder out of the SimpleRockets 2 folder so it automatically generated a new one- it must have been stuck in that last flight of mine- by getting rid of that last flight’s file I must have fixed it- I even was able to put the files back after opening the game- nothing at all was lost!
3.7 years ago@MSCSpaceworks @Silentime @plane918273645 thanks for all the help! I will try this.
+1 3.7 years ago@plane918273645 so will it work if I just copy the entire craft design folder and put it out of the SimpleRockets 2 folder? Are there any other files I need for the crafts? Also will this work for subassemblies too?
3.7 years agoOr should I just copy entire userdata folder? Entire SimpleRockets folder?
3.7 years agoDoes anyone know if in files I go to SimpleRockets 2 - userdata - craftdesigns and copy the craft files I want to save into a different folder, than delete and reinstall SimpleRockets 2 and copy the files back into the craft design folder, will I have the crafts or do I need to save more files or is it just not possible? Or if I just copy the whole craftdesigns folder?
3.7 years agoDoes anyone know if in files I go to SimpleRockets 2 - userdata - craftdesigns and copy the craft files I want to save into a different folder, than delete and reinstall SimpleRockets 2 and copy the files back into the craft design folder, will I have the crafts or do I need to save more files or is it just not possible?
3.7 years ago@MSCSpaceworks thanks! Do you know of any way to save some of the craft files before doing this? I have many crafts that are not posted that I do not want to loose
3.7 years ago@Silentime do you know if there is any way to save the craft files, then delete?
3.7 years ago