A fairly accurate auto orbit program that can carry a max of 70,000 kg to a 100km orbit, or 45,000 kg to a 300km orbit, and get within 20km of your target orbit(the higher the orbit, the less accurate it will be). You can change the target orbit and heading in by going to the program. There will be a few scripts with comments on them, telling you what each variable will change.
Thanks To SmurfResearchX for helping me figure out this code.
Troubleshooting
If the rocket just stops and goes into 10x time warp after doing the first bit of circulization then enters the atmosphere again, then you need to make either the CirculizationBurnTime variable higher or the FinalBurnThrottle variable higher.
This is my first vizzy orbit program, so sorry if you have problems.
GENERAL INFO
- Successors 1 craft(s)
- Created On: iOS
- Game Version: 0.9.404.0
- Price: $39,070k
- Number of Parts: 147
- Dimensions: 49 m x 29 m x 14 m
PERFORMANCE
- Total Delta V: 5.2km/s
- Total Thrust: 13.9MN
- Engines: 41
- Wet Mass: 1.84E+6kg
- Dry Mass: 99,537kg
STAGES
| Stage | Engines | Delta V | Thrust | Burn | Mass |
|---|---|---|---|---|---|
| 1 | 36 | 3.4km/s | 9.4MN | 2.6m | 8E+5kg |
| 2 | 0 | 0m/s | 0N | 0s | 3.56E+5kg |
| 4 | 3 | 1.8km/s | 2.8MN | 73s | 1.57E+5kg |
2 Comments
- Log in to leave a comment
-
3,634 JSO183.6 years ago
@MSCSpaceworks thanks for the upvote! If you like this craft you should try this: https://www.simplerockets.com/c/IU9ijk/JSO-Heavy-Payload-Auto-Lauch-update
There is a slight update in the vizzy to improve accuracy
@JSO18 sure!