@InfinityTechnology That's awesome, really it is. Always a pleasure seeing these awesome crafts you make. Can't run them on my low end device but really is a pleasure seeing the build up process and videos of your crafts running.
@Dereric Great to see someone older here. Thanks for sharing. I think I'll follow your example, finding some little time to play once a twice a week. Thanks so much for the insight! Really appreciated.
@TronicOrbital I guess it's about really trying to find a good balance between gaming and everything else, it's just a really difficult balance to strike. Wow, that's so sweet of your Dad. I'm sure that's the way to go by things. I'm sorry about your Mom passing.
@HoverArrow Thanks HoverArrow, appreciate it. Was now thinking of using Propellers. Would still need to figure out some Vizzy. Just that I don't have much time to learn and also I don't come from a Computing or Programming background, so Vizzy for me doesn't come as easy to understand.
@ReturnofSlav Thanks ReturnofSlav, but figuring all that out will need time and that's what I'm trying to work against. Just the need of time. If only there was a way to make time. It's just working through family, work, life, mental health, there isnt too much time left. Wish I had come across this game when I was younger and my head was clearer and I felt much smarter then, then really I'd maybe have mastered Vizzy. But I'll try to give it time and do it by your suggestions, they're really great by the way, thanks.
@SamTheFox Thanks Sam, been trying that, not working for me. Thinking it might be my PC's problem. It's quite low spec so at times it doesn't simulate physics right.
@SamTheFox I am talking about the Text part that allows you to put text lables on fuel tanks/fuselages. Wanted to copy a Symbol instead from Microsoft Word or the internet and use it as a text lable - for instance the square symbol □ will not be displayed when put into the text section of the text part.
@t4zcomz Oh my, totally missed that, even with the Kell Aerospace Logo on the side😂. My bad. Thanks @t4zcomz😊. @pedro16797, this is now perfect for me😂.
I use a phone to access this site. It's always set on low brightness to conserve battery, couldn't see a thing on the poster but the Droonaut and the Computer screen, then I put the brightness on full and lo and behold a whole treasure chest of references😂😂😂. I must admit though I missed a lot of them but at I managed to remember a lot of crafts there😊, especially the awesomeness that is the Graal😂. Is there something from Kelly in there? If not, there should be😂. But really, @pedro16797, awesome awesome work there.👍🏿👍🏿👍🏿
@SpaceSharkie201 Hello there. Figured it out. Had to tap on drop down button next to Downloads Indicator on the post, that's where the publish option is. So sorry. I'm so dumb.
@plane918273645 Hello. I just tried that but its not working. Its like after transferring the xml data from the planet with custom structures to the target planet I want them to go. I did this by copying the lines with the Structure Nodes of the custom Structures I wanted to move pasting them on the appropriate section in the target planet xml. On selecting the updated target planet in Planet Studio, a prompt comes up saying something like that it has recognized new lines of data that do not match what is saved up or something like that. There even is no preview of the updated planet, it will be an error of sorts.
I dont know if there is any other way of doing it besides what I have described above.
Congrats @Tweedles, happy for you, especially doing this with Dad, I feel it's special.
In my late 20s and I'm not driving as of yet. Please strive to be better than me😂.
There is a point made here. Starting out, it took me quite some time to get to the minimum 15 points for me to be able to upvote others' works. So I got used to being able to download crafts without necessarily upvoting them. So I think it'd be nice to show also an indicator of some sort to show the number of downloads from your creations as well. But I guess that also defeats the purpose of this post. It far much matters more to enjoy yhe game, building and sharing, rather than solely focusing of progress by number of upvotes.
Not a fan of grid fins myself in SR2, but I've tried to test them out without much success. However, I believe this is an excellent suggestion, well done. Might be a fan of them if they were as you've suggested.
Maybe put it up in the Suggestions section, perhaps also put a link here leading to the suggestion and those of us who like this idea will upvote it there, so that it can be considered by the devs if it's feasible to work on or not. Either way, this is s great idea.
@InfinityTechnology That's awesome, really it is. Always a pleasure seeing these awesome crafts you make. Can't run them on my low end device but really is a pleasure seeing the build up process and videos of your crafts running.
2.9 years ago@InfinityTechnology So your PC doesnot lag at all whilst making these crafts?😁
2.9 years ago@InfinityTechnology Awesome 😎 😁
2.9 years agoAwesome 😊. Part count by now? 😁
2.9 years agoAwesome 😎 How many parts so far?
2.9 years ago@Dereric Great to see someone older here. Thanks for sharing. I think I'll follow your example, finding some little time to play once a twice a week. Thanks so much for the insight! Really appreciated.
2.9 years ago@TronicOrbital I guess it's about really trying to find a good balance between gaming and everything else, it's just a really difficult balance to strike. Wow, that's so sweet of your Dad. I'm sure that's the way to go by things. I'm sorry about your Mom passing.
3.0 years ago@HoverArrow Thanks, really appreciate it. Will look into it just now 😊.
3.0 years ago@HoverArrow Thanks HoverArrow, appreciate it. Was now thinking of using Propellers. Would still need to figure out some Vizzy. Just that I don't have much time to learn and also I don't come from a Computing or Programming background, so Vizzy for me doesn't come as easy to understand.
3.1 years ago@plane918273645 Thanks for the suggestion. Will try to figure it out.
3.1 years ago@SamTheFox Yes lift forces always on for me.
3.1 years ago@ReturnofSlav Thanks ReturnofSlav, but figuring all that out will need time and that's what I'm trying to work against. Just the need of time. If only there was a way to make time. It's just working through family, work, life, mental health, there isnt too much time left. Wish I had come across this game when I was younger and my head was clearer and I felt much smarter then, then really I'd maybe have mastered Vizzy. But I'll try to give it time and do it by your suggestions, they're really great by the way, thanks.
3.1 years ago@SamTheFox Thanks Sam, been trying that, not working for me. Thinking it might be my PC's problem. It's quite low spec so at times it doesn't simulate physics right.
3.1 years agoIt'll be sad not having one more Simple Rocketeer around. Surely will be missed.
Wishing you all the best on your future endeavors.
Hopefully we'll cross paths again sometime in the future.
May the odds forever be in your favour, May you Stay blessed, live long and prosper 🖖🏿
3.1 years ago@SamTheFox I am talking about the Text part that allows you to put text lables on fuel tanks/fuselages. Wanted to copy a Symbol instead from Microsoft Word or the internet and use it as a text lable - for instance the square symbol □ will not be displayed when put into the text section of the text part.
3.1 years ago@YaMomzBox420 That makes the most sense. Thank you so much for the response.
3.1 years agoAwesome work you guys. You're awesome.
3.2 years agoPraying for safety and sanity to prevail.
3.2 years ago@rocketcrazy Wow, lots of work there. All the best.
3.2 years agoAwesome 👍🏿 😎
Part count so far? 😊
3.2 years ago@t4zcomz Oh my, totally missed that, even with the Kell Aerospace Logo on the side😂. My bad. Thanks @t4zcomz😊. @pedro16797, this is now perfect for me😂.
3.4 years agoI use a phone to access this site. It's always set on low brightness to conserve battery, couldn't see a thing on the poster but the Droonaut and the Computer screen, then I put the brightness on full and lo and behold a whole treasure chest of references😂😂😂. I must admit though I missed a lot of them but at I managed to remember a lot of crafts there😊, especially the awesomeness that is the Graal😂. Is there something from Kelly in there? If not, there should be😂. But really, @pedro16797, awesome awesome work there.👍🏿👍🏿👍🏿
3.4 years agoPart Count please 😁
3.5 years ago@Chtite451SR2 Thanks. Used that option of requesting Desktop site. Worked using Opera Browser for Android. Really thanks.
3.6 years ago@SpaceSharkie201 Hello there. Figured it out. Had to tap on drop down button next to Downloads Indicator on the post, that's where the publish option is. So sorry. I'm so dumb.
3.6 years ago@SpaceSharkie201 Thanks. Was asking for the other way round. Can't publicise an unlisted upload.
3.6 years agoYes
3.6 years ago@plane918273645 Hello. I just tried that but its not working. Its like after transferring the xml data from the planet with custom structures to the target planet I want them to go. I did this by copying the lines with the Structure Nodes of the custom Structures I wanted to move pasting them on the appropriate section in the target planet xml. On selecting the updated target planet in Planet Studio, a prompt comes up saying something like that it has recognized new lines of data that do not match what is saved up or something like that. There even is no preview of the updated planet, it will be an error of sorts.
I dont know if there is any other way of doing it besides what I have described above.
3.7 years ago@DrexxVolv Thanks, I'll try to figure out stuff.
3.8 years agoHow about going DARSX 😊😁
3.8 years agoWould it be too much to ask for both in one?😂😂😂
3.8 years agoCongrats @Tweedles, happy for you, especially doing this with Dad, I feel it's special.
3.9 years agoIn my late 20s and I'm not driving as of yet. Please strive to be better than me😂.
I think this is a great idea. I believe it would really help the mods with moderation duties since it seems there are s few of them.
3.9 years agoThere is a point made here. Starting out, it took me quite some time to get to the minimum 15 points for me to be able to upvote others' works. So I got used to being able to download crafts without necessarily upvoting them. So I think it'd be nice to show also an indicator of some sort to show the number of downloads from your creations as well. But I guess that also defeats the purpose of this post. It far much matters more to enjoy yhe game, building and sharing, rather than solely focusing of progress by number of upvotes.
3.9 years agoNot a fan of grid fins myself in SR2, but I've tried to test them out without much success. However, I believe this is an excellent suggestion, well done. Might be a fan of them if they were as you've suggested.
Maybe put it up in the Suggestions section, perhaps also put a link here leading to the suggestion and those of us who like this idea will upvote it there, so that it can be considered by the devs if it's feasible to work on or not. Either way, this is s great idea.
Again, excellent idea.😊
3.9 years ago@TweedleAerospace Nice. Great work. Will try to do it myself one of these days
3.9 years agoWow, impressive! 6 hours game time or real time or both😁
3.9 years agoWell-done.😊
4.0 years ago@JSO18 I'm now considering doing the same myself actually.
4.0 years ago@Hermes01000100 Great, thanks, figured that might be the reason.
4.0 years agoWould want to know as well. Thanks for asking this question @AshtvinayakAerospace
4.0 years ago@TweedleAerospace Yeah, exactly 😂.
4.1 years agoMay the force be with you too. May you be one with the force and the force be one with you.😊
@JastroOne1 Awesome, looking forward to it😊. Looking forward to the return of the humans and more. Enjoying your lore at every turn. Thanks.
4.1 years ago@seventeen Yeah, I did, on Playstore. I play on Android. If I get some funds and get a new PC, considering getting it on PC as well from Steam.
4.1 years agoCongrats @seventeen
4.1 years agoThanks everyone for the welcome back Upvotes, I really appreciate it.
4.1 years ago@Arstotzka Thank you so much.
4.1 years ago@Infinite17 Great, really happy to know another African in the Community. Thank you so much.
4.1 years agoThank you for the game @AndrewGarrison, it's really great.
4.1 years ago