https://www.simplerockets.com/c/Dk5Eww/Falcon-9auto-launch-landingRSS?redirect=false
I fixed some problems,like vertical speed too high,adn that is instructions?
This craft is build for RSS,so it may have something wrong working in Juno system!
Thanks for click in my craft! and here are some iinstructions about the rocket.
Q:HOW TO USE IT?
A:Active AG2,and just sit down and watch,after the second stage and payload get in to the orbit,the program will swich to core stage(if it does not swich,plz manually swich to core stage),then,active AG4,and the core stage will run the landing program,then, you can sit down again and watch.
Q:cool!but can I put my own payload?
A;Certain,just make sure your payload's mass is between#11000kg-17000kg,lighter or heavier may lead to a fail landing !
NOTE:if your game version is uner0.9.2,the second stage engine may become "pressure-fed"power cycle,if it happened,change it to "gas-generator-1"
IF you find out any problem about my craft,plz leave a commnet,below!
GENERAL INFO
- Created On: Windows
- Game Version: 0.9.923.0
- Price: $172,828k
- Number of Parts: 266
- Dimensions: 70 m x 5 m x 6 m
PERFORMANCE
- Total Delta V: 35.8km/s
- Total Thrust: 210.9MN
- Engines: 12
- Wet Mass: 3.74E+5kg
- Dry Mass: 72,270kg
STAGES
| Stage | Engines | Delta V | Thrust | Burn | Mass |
|---|---|---|---|---|---|
| 1 | 9 | 31.0km/s | 9.1MN | 21.7m | 3.74E+5kg |
| 2 | 1 | 4.7km/s | 981kN | 3.8m | 73,067kg |
5 Comments
- Log in to leave a comment
-
-
7,379 SatelliteTorifune1.6 years ago
@MrHindsight if you still have any problem,I 'll link a video later to show how it works.
-
7,379 SatelliteTorifune+1 1.6 years ago
@MrHindsight the main problem is thta you are useing this craft in Juno system,and however,this craft is built for RSS.(You can check the link up there}
the small blank square have nothing to do with any programe in fact(I don't know why either,maybe you could ask Jundroo)
the vizzy programe worked in my phone too. -
36 MrHindsight1.6 years ago
Hello 👋
I just tried launching on Android. Auto orbit doesn't seem to set the correct apoapsis and just keeps extending. Says Max Q, then the craft turns and angles, then releases fairings while burning, then just continues burning until apoapsis is wayyyy out, maybe 109Mm, with a crash trajectory back on droo. Was this intended for PC, or are vizzy programs cross-compatible between pc and android? I opened the flight program, and there are small blank squares about the program that I couldn't delete or move. It almost looks corrupt? Maybe I'm doing something wrong. Thanks!
@QuantaSpace 没试过，但是大概率不行