Merry Christmas!!!!!!!!!!!!
Three parts, get all three craft files for the whole kit!!!!!
1D / 2D / 3D / So-onD..... Arrays made easy.
Save time, your brain, and your calculator's batteries 🐒
Tools are in the (Back) area off the grid, so they are easier to see. Zoom out facing the grid to raise the camera if you don't see them initially
Set up a 500 by 10 row switch board for a control center, and make it in 1/10th of the time versus before. Simple clone and copy can line up as many items you want in a click and drag. Once all the nodes are filled, you disconnect the "Array"-bicus tool, connect it to your model, and it comes out evenly spaced between, or evenly spaced around as well. Works like an old school abbicus with set up, in you count, all possible calculations are already built in. Leave the calculator alone (most cases, I tried to make the most common ones you would likely use)
Please don't forget to enable the nodes you want to use, They are disabled to help make it more mobile friendly. Please do follow the help file, and Dowload all three (3) Craft files, as they are a set amongst themselves. 3 files instead of one to make it easier to use, PC or Mobile, and disabled nodes so Graphics cards don't go on strike.
GENERAL INFO
- Created On: Windows
- Game Version: 0.9.802.0
- Price: $50k
- Number of Parts: 270
- Dimensions: 0 m x 1 m x 1 m
PERFORMANCE
- Total Delta V: 0m/s
- Total Thrust: 0N
- Engines: 0
- Wet Mass: 1,365kg
- Dry Mass: 1,365kg
STAGES
| Stage | Engines | Delta V | Thrust | Burn | Mass |
|---|
9 Comments
- Log in to leave a comment
-
1,180 MechanizedBlackSheepPinned 2.5 years ago
Make sure to download all 3 files! The third file explains how to use these and the other array tools in the 2nd kit part
-
-
1,180 MechanizedBlackSheep+1 2.5 years ago
I'll be able to upload the switch board model tomorrow. I made a 545 point array, 109 in a row, in 5 columns with the tool kit. Did in an hour flat. Laying out that many switches that tight required math and a lot of micro placement and copying, and can take days. I do it with the Toolkit, and one hand, in one hour, not one calculation @FelixFan1 download and look at the third file, the help file. It explains everything
-
-
1,180 MechanizedBlackSheep2.5 years ago
I just crammed 545 switches in 6.1 meters by 2 meters in an hour, with only one hand 🙉 @FelixFan1
-
-
1,180 MechanizedBlackSheep2.5 years ago
I just finished that control center switch board, 545 switches across 5 rows, in an hour. Upload limit is 3 per day, and I'm still looking for how many surface attachments I can make. So far I've got 110 and don't need to connect anymore so that's that news 😂
-
We need a way to make arrays, I made that way to do it.
Any type of arry can be made with these kits, to an infinite depth