Description
32nd: This is my third build from scratch, built according to the poll on my channel (freestyle plane), so I built this drone!
Inspiration
It was loosely inspired by the SR-75 Penetrator, but the nose design was inspired by some supersonic planes, like the Concorde! The colouring was heavily based on the SR-75 and the engine shrouds were extended to slightly mimic the engine cover designs!
AG Functions
AG1 - Engines
AG2 - Full Canard Movement (20° - Used for subsonic speeds)
AG3 - Limited Canard Movement (10° - Used for transonic speeds)
AG4 - Canard Control Surfaces (Used for supersonic speeds)
AG5 - Gyros
AG8 - Landing Gear
Notes
AG2, AG3 and AG4 are ordered from most maneuverable to most accurate
Switching between accuracy settings must be done only once pitch has been reset to 0°, or the pivots to the canards will lock in their current position if you turn the AGs off
Only switch canard ranges once oscillations occur
Stats
- Optimum operating height at max speed – ≥5000m
-Max speed at 10000-11000m – Mach 2.75
@Tranedi, rate this from 1-10! Be 100% honest!