LX-175 "Eagle", the modern regional workhorse.
This plane carries an advanced flight computer prototyped by Centurion88, which is why the plane carries his name as well. We built on his work, sheared off some sharp edges and put it in an airliner with an ergonomic cockpit from which you can control the plane effortlessly.
Featuring:
-Custom cockpit with all pressable buttons (I know the autobrake triangles are hard to select)
-Advanced autopilot
-Wing flex
-Custom flaps, spoilers, clamshell reverse thrusters and landing gear
-Lights



Changes to autopilot
-Lvl change now depends on a max pitch angle instead of the inputted VS, even when VS was not engaged (which could be 0, which in turn bricked the autopilot)
-Integrated an autotrim system
-Made everything dependent on the indicated air speed, such that the plane will behave the same at every altitude
-Added a database of runways to select from when inputting an approach
-DSC 27-09 and 13-31
-Ali 10L-28R and 10R-28L
-Village 23
-SR2 base ;) rwy 18 and 09
-Flight computer now is a separate command chip, freeing a lot of AGs for controlling the plane
Controls:
-AGs labelled
-Slider 1 down => flaps
-Slider 2 => Trim (automatic option as well)
-Slider 3 => Camera zoom
-Brake => Airbrakes/spoilers and reverse thrust
Note:
-Do not ever set the flight computer to your primary control pod; it will mess up all your AGs.
-False glideslopes exist, for example, if you are lower than the threshold on approach
Have fun!
4 Comments
- Log in to leave a comment
-
-
360 centurion88+1 13 hours ago
@JLaerospace An excellent job! Very detailed and much better than the prototype. You might consider adding some dead weight to the nose component to improve the longitudinal stability.
-
Also can you make a crj-500