White Falcon + Photon 1A sat

After 1 hours of hard work, I present to you the White Falcon rocket with Photon 1A in it’s fairing!

White Falcon:

Inspired by Vega C, the White Falcon(WF) is a medium sat launcher designed to launch payloads into Leo and Meo. The first stage consists two Ignis 1A solid rocket motor, this will let the rocket ascent through the thickest part of the atomosphere quickly with 2.57 maximum TWR and power the rocket all the way up to about 60000M if following normal gravity turn. The second stage consists 9 Nexus 1A engine, and will power the rocket all the way to orbit that ranges from 76000m-200km. The third stage, or the kick stage have 1 Aether-A engine that will enable precise orbital adjustment with extremely high efficiency, and it can power the rocket all the way up to 500km AP/PE if you have enough patience. Since there is a command chip on the third stage, you can deorbit it after the mission is completed.

Photon 1A:
Photon 1A is the payload on my rocket, you can change it to anything you want. Anyways, it have one ion engine to power it, it is extremely great to do small orbital adjustments, or change your orbit. In normal circumstances, it will not run out of fuel because of the 3 day burn time, and electricty will not be a bug problem with a bunch of electric tanks and solar panels.

AG: don’t use the stages, use AG instead.
Stage one engine: ignites the two solid motor on the first stage.
Stage two sep: separates stage one and two.
Stage two engine: ignites the second stage engine.
Stage three engine sep: separates stage two and three, with stage three engine ignition.
Fairing: Fairing sep.
Solar panels: solar panels on the satelite.

important notes:
Although stage one has two solid rocket boosters, it can roll pitch, or change headings with slider one(roll) and gyroscope for pitch and heading change.
there is a bit of problem when standing on the pad, it tends to tip over after about 20 secs and it is still standing on the pad, this can be fixed if you lock the pitch to 90 degrees before launching, or launch immediately.
there will be a bit of heating shortly before stage one burn out, that is totally normal, and just continue your flight, it should not blow up any parts.
throttle down second stage a bit because it got high TWR.
it is only a medium sat launcher.

Hope you enjoy! Most of the satelite is made by xu6666666, I just add a battery pack.