A replica of the real-life DHC-6 Twin Otter turboprop airplane.
It's not entirely vanilla; I had to use the tinker settings to give the replica a realistic mass so it could fly.
INSTRUCTIONS
• Throttle to get the propellers going
• Slider 1 for pitch control
To take off, give it full throttle and put slider 1 at -100% when you reach about 80 m/s. Once you're in the air and going around 90 m/s, put slider 1 at -74% to level out. Use a combination of yaw and roll to turn.
Just like the real DHC-6 Twin Otter, this replica has a max sea-level cruising speed of about 94 m/s (210 mph, 338 kph). The real plane has three blades on each propeller, but for some reason that made the replica very unstable to fly, so I went with four.
GENERAL INFO
- Created On: Windows
- Game Version: 0.6.7.2
- Price: $766k
- Number of Parts: 114
- Dimensions: 6 m x 20 m x 16 m
PERFORMANCE
- Total Delta V: 0m/s
- Total Thrust: 0N
- Engines: 0
- Wet Mass: 3,078kg
- Dry Mass: 2,176kg
STAGES
| Stage | Engines | Delta V | Thrust | Burn | Mass |
|---|
SPOTLIGHTS
- AnotherFireFox 5.4 years ago
- FlexNoTape 5.4 years ago
- Chancey21 5.3 years ago
- Rafaele 5.3 years ago
2 Comments
15 Upvotes
Log in in to upvote this post.
@AN2Felllla For some reason, giving it three blades made it veer to the left uncontrollably. Not sure why.