VROZ II (97% Completed)

The Mark Two Vroz. I decided to upload it so people won't be using that s######r original Vroz.

Everything is fined to used, The only thing incomplete are fuels, some designs, vizzy and engins.

Payload tutorial:
1.Moved away the black base fairing, make sure its set to "Connected"
2.Go inside the Stage three fuel block and find the "Vroz Command Module Chip" and set it to primary.
3.Then press the block dummy and removed all of its connections and delete it
4.Put in your cargo and connect it to the Payload Interstage
5.Adjust the position of the Launch Tower to ontop of your cargo, make sure its interstage is touching your cargo
6.Then check if your Launch tower is sticking out lf the fairing by moving the fairing base back to its original place. if not then your DONE. if yes then go to 7.
7.Adjust the launch tower body (the top one) by unconnecting it from the bottom part and then adjust it till it fits inside the fairing and connect it all again. then your DONE.
8.Or you can make the fairing longer but you don't want that cause its just gonna look like a flying Spear (Are you still reading?)

Other:
AG are simple. No need to explain.

At launch, Always use 50-70 throttle depending on the weight of the cargo cause the SRB will do all the work then 100% after your are in Stage 2

Please make sure to not change the pitch of it extremely fast or in a sudden away and keep watch of rocket cause it always burn up in the atmosphere