Primary Flight Display v1.0 (Prototype)

This is my first experience with MFD.

This is a simple PFD that shows an aircraft's position in the air, its speed, altitude, and heading.

1- Speed.

Shows the speed in meters per second from 0 to 999. If the aircraft is accelerating, a green line will appear at the top, and if the aircraft is decelerating, a red line will appear at the bottom.

2- Altitude.

Shows aircraft altitude in meters from 0 to 99.999. If the aircraft is gaining altitude, a green line will appear at the top, and if the aircraft is losing altitude, a red line will appear at the bottom.

3- Course.

Just heading from 0 to 359°.

4- Gear indicator.

If the landing gear is retracted, the indicator will turn green, if the landing gear is released, then it will turn green. By default, landing gear is assigned to 8 AG, you can change this AG in the display program.

5- Ground indicator.

If the plane is in the air, it will turn red, if the plane is on the ground, it will turn green.

6- STALL alarm.

If the aircraft's speed drops below the programmed speed (you can change it in display program of course), then a stall warning will appear along with an audible signal.

7- Pull up alarm.

If the program calculates that in "X" seconds the plane will hit the ground, a warning will appear along with an audible signal. (Time "X" you can change in the display program)

!!! You can change the presence of a sound signal and its volume in the display program, use "Tinker Panel" for scaling. Please note that at high pitch the roll can behave unstable!!!