Hello everyone! I have made possibly my best craft yet! Since I'm Canadian I put my best effort into making this as good as possible. In just under 400 parts you get: Automatic Flaps, AoA limiter, Vapour cone, AoA Vapour, Formation/Nav Lights, and more!
I was asked to make an F-18 since I haven't in a long time. So I figured I'd make the Canadian F-18. And since I'm making the Canadian F-18 I'd better make it look good, so I gave it arguably the most beautiful CF-18 livery. The 150th Canada Anniversary. This took me 13h to make, and I'd do it again. I genuinely had fun making it, and I hope you have fun flying it.
One last note before you take off in this beautiful jet. If you have high graphics but low FPS the AoA limiter could not work, So I suggest lowering your graphics.
Please, enjoy!
GENERAL INFO
- Created On: iOS
- Game Version: 1.3.205.0
- Price: $11,127k
- Number of Parts: 368
- Dimensions: 4 m x 11 m x 17 m
PERFORMANCE
- Total Delta V: 0m/s
- Total Thrust: 0N
- Engines: 2
- Wet Mass: 11,137kg
- Dry Mass: 6,645kg
STAGES
| Stage | Engines | Delta V | Thrust | Burn | Mass |
|---|
16 Comments
- Log in to leave a comment
-
2,391 ThePBJellyGamesone month ago
@Liger7892TK Version 2 is now out, so if you want a better version for your build it is now available.
-
2,391 ThePBJellyGamesone month ago
@Liger7892TK sure, btw within this week I hope to post a version 2 of this craft that fixes the issues of this one.
-
-
-
-
2,391 ThePBJellyGamesone month ago
@ThePBJellyGames and if you turn off Flt.Limits that just disables the AoA limiter, so you can pull as hard as you want. No guarantees that you'll like it without the limiter.
-
2,391 ThePBJellyGamesone month ago
@AlphaSpaceTechnologies if your having issues with the AoA limiter, as stated in the description "if you have very high graphics but low FPS the AoA limiter could not work."
-
2,391 ThePBJellyGamesone month ago
Slight issue I just now noticed, the tail fins are rotated 10° too far because I mismesured something. So if your going to save this I recommend putting them back 10° and fixing the lights that aren't attached to the tail.
-
3,249 AlphaSpaceTechnologiesone month ago
Noticed issues with pulling high AOA, it makes the plane jerk and roll, you might wanna use version 1 or 2 wings, and maybe strengthen the stability Modifier of the parts that hold rotators
-
2,391 ThePBJellyGamesone month ago
@Mystial thanks! I couldn't really make an interior for this one since there are so many interfering parts...
-
-
2,391 ThePBJellyGamesone month ago
I may be a little early to say this, but I might make an F-18E next
-
2,391 ThePBJellyGamesone month ago
@TriVector its COM could seem low because its wings are high. But I made sure it flies well
-
-
2,391 ThePBJellyGamesone month ago
Did I mention it's scale accurate? Including weight, TWR, and general scale?
Ok, so if I find 3 more issues with this thing I'll make a fixed version. So far we have: the tail fins rotated too far, and the switch from AoA limiter to general limiter allows it to pitch too far. Please let me know if you find anything else.