Concorde

This was a tough build, yet one of my favs.
Concorde, a legendary european supersonic plane
if you dont know yet, tried to build it with as little parts as i can,
but 500ish parts is fine.

Features:
-DROOP SNOOT:
the iconic snoot can droop for 15 degrees with 3 different stages, 50%, 75%, and 100%, with the visor lower down.

-Variable thrust nozzle:
the engines has nozzles that open and close depending on the throtle, this has no effect on the speed, nor the engine, its just purely esthetics.

-Reverse Thrust:
just like the Variable thrust nozzles, this is purely just esthetics, but it just closes
the nozzle to "redirect" thrust backwards.

-Interior:
the interior is not really that detailed, as like i said, i want a low part count, and a detailed interior requires more parts so i decided to add less detail, and the interior it self has features like,
-yoke
-guages
-seats
-working throttle

-Custom Landing gear:
i added a custom landing gear as normal landing gears are too big, and cant be set in the shape of the real concorde, both front and rear landing gears are custom, except for the tail landing gear, i got lazy with it

-Vapor Cone:
i added a custom engine that fires custom flames that looks like a vapor cone, everytime the plane goes supersonic, or above mach 1.

Issues to point out:
-Downforce:
make sure that you dont try to lift off after going over 200 m/s as the if wings tilt down, it creates downforce and doesnt allow you to lift off, i suggest to try and lift off between 150-180 m/s.

-Model:
the model isnt that create, as trying to get a complicated shape you want is quite difficult, specially with the nose cockpit area, and wings, sooo just dont mind it.