DDG 51 Aleigh Burke V2

Vid of ship functions:
https://www.reddit.com/r/simplerockets/s/UPAoDqkcLQ

Version 2 improvements:
-automatic ship listing correction
-active sonar
-crane with deployable/retrievable zodiac raft
-nuclear reactor - no battery recharge times

Full scale replica of DDG 51 Aleigh Burke missile destroyer. Flight 1 deck configuration. Main gun, forward and rear phalanx, and mast searchlight are all moveable. Bridge doors open, bridge is also walkable. Missle hatches open with 14 launchable cruise missiles (7 fwd/ 7 aft). Flight deck is landable for a helo. Working crane/zodiac raft.

Mast starts folded down so ship meets the height restriction in career mode. Turn the doors action group on/off and mast will fold up into place (only needs to do this once).

Slider 1 is main engines rpm
Throttle is manuvering engine RPM
Yaw slider is rudder/maneuvering
Slider 2 is gun/phalanx/searchlight rotation
Slider 3 is gun/phalanx/searchlight elevation
Slider 4 is crane elevation and camera zoom. Bridge/searchligh/flightdeck/mast night vision
Break slider is open/close brige doors/crane rotation

For guns/searchlight select which one in the action groups you want to control or multiple at once then use sliders to move around.

To fire missiles, open the missile hatchs with the action group. Then just hit the stage button. Each hit of the stage button will launch one cruise missile.

To deploy zodiac detach it from docking port, turn on crane action group, lift with slider 4, rotate it over the side with break slider, then lower all the way down with slider 4. Turn off crane action group then switch to the zodiacs control pod.

To retrieve zodiac move it onto the crane hook, turn time compression to 10x to avoid it drifting away, switch to the destroyers control pod, turn on crane action group, use slider 4 to lift crane (can go back to normal time), rotate crane back to deck with break slider, lower raft onto docking port. If you have trouble getting it to dock turn the docking port strength up to 120% and hover over the port slightly-the docking port will increase to 2000% after a few seconds and then slowely lower the raft. It should dock. May require a little bouncing up and down to get it attached. If you have trouble see the vid for how to do it.