409 downloads

It doesn't float because it's just a chip, the fuselage is just aesthetic, so you can have a smooth boat and just care about making it float and the top, reducing substantially the part count.
Of course this is xml edited, be careful tweaking the files if you don't fully understand what you're doing. I highly recommend using overload to tweak to top and bottom sizes to whatever you need.

If you don't need it to be hollow and you want to get rid of the visual glitch, try using the same proportions and corner radiuses on a nosecone

GENERAL INFO

  • Successors 2 craft(s) +238 bonus
  • Created On: Windows
  • Game Version: 0.9.404.0
  • Price: $164k
  • Number of Parts: 1
  • Dimensions: 4 m x 8 m x 34 m

PERFORMANCE

  • Total Delta V: 0m/s
  • Total Thrust: 0N
  • Engines: 0
  • Wet Mass: 11,475kg
  • Dry Mass: 11,475kg

STAGES

Stage Engines Delta V Thrust Burn Mass

Comments

  • Log in to leave a comment
  • Profile image

    I do not know why, but this just seems blursed.

    12 days ago
  • Profile image
    2,707 AeromanYett

    Yes v2 summer

    12 days ago
  • Profile image
    45 StigRuz

    I go to cylero with this boat 🤣

    25 days ago
  • Profile image

    @SiBasedDragonLanFeng yup, pretty much anything works

    26 days ago
  • Profile image

    can i set part style to other things such as "Inlet-2" for the inlet

    26 days ago
  • Profile image

    I'm so surprise that part style can set to Fairing nosecone-4

    26 days ago
  • Profile image

    @Zyvx great! That was the main objective of this craft, many people don't know the huge possibilities with the shape tool and some of the meshes available. The jet engine shroud style is very useful too.

    27 days ago
  • Profile image

    Next level of cursed

    27 days ago
  • Profile image
    9,253 Zyvx

    @pedro16797 very clever idea, nice. You given me some ideas to experiment with. Thanks

    27 days ago
  • Profile image

    @Zyvx thanks!. This is what I usually use for cockpits, although with nosecones so it's transparent from inside and opaque from outside

    27 days ago
  • Profile image
    9,253 Zyvx

    I just read Garrison's post and saw your DEV tag, awesome and congratulations

    27 days ago
  • Profile image
    9,253 Zyvx

    This is neat, I tried a cargo bay and shaped it like this to see what you did, yet cargo part options don't show on yours. This boat of yours brings me an idea from simple planes, we need hollow fuselage, and then I pictured your boat upside down and transparent, it could be a cockpit canopy. If we had hollow fuselage with transparency paint options, we could have windows the Astronaut won't float through.

    27 days ago
  • Profile image

    Well.....

    28 days ago
  • Profile image

    @McDuetchVan but can it run DOOM?

    28 days ago
  • Profile image

    @DoublehshAerospace I wanted to have a transparent background for a while but never bothered changing it

    +1 28 days ago
  • Profile image

    @pedro16797 ooh nice profile picture :D

    28 days ago
  • Profile image

    @PrinceZuko they are in meters. btw, if you have access to the pc version you should try overload, it's a great way to have fuselages with out of range dimensions

    29 days ago
  • Profile image
    3,358 McDuetchVan

    So glad there's finally a craft I can run on my Commodore 64!

    +3 29 days ago
  • Profile image

    @pedro16797
    bottomScale 9,45
    offset 0,6,-1.2
    topScale 3.5,40
    also, unit sizes in SR2 are the same as in SP, where 1 unit=1.65 feet correct?

    one month ago
  • Profile image

    @ThePilotDude what size do you want it to be?

    one month ago
  • Profile image
    1,227 NyrEden

    wait what? this is illegal!

    one month ago
  • Profile image

    @pedro16797 that would be great, currently I'm building the deck and superstructure of the ship separate from the 1 piece hull, and if I could make the hull piece a subassembly, that would be very helpful

    one month ago
  • Profile image

    @ThePilotDude if you plan to use it more I can make an unlisted post with the shell and the chip in 2 different parts. Remember you can always just copy the shape values from this part and use them in any other

    one month ago
  • Profile image

    @pedro16797 can't drag parts (and by affect can't create subassemblies), moving the view around causes you to have to unclick the part you're shaping, then reclick it and reenter the menu to be able to edit it again, parts automatically attach to the hull when you drag them out of the menu, and some others.

    one month ago
  • Profile image

    @ThePilotDude what bugs?

    one month ago
  • Log in to see more comments

47 Upvotes

Log in in to upvote this post.