CW CAV (Colony Assembly Vehicle)

Here is a short 5 min vid of me constructing a 12 module colony on Luna in my vanilla career game:
https://www.reddit.com/r/simplerockets/s/gGYayfh8pQ

Colonizing worlds colony/outpost assembly vehicle

Vehicle pre-loaded on ARTEMIS transport (for ARTEMIS controls refer to ship download).

CAV slides under colony modules and lifts them up, and moves them into position to be connected.
Build an offworld colony anywhere in career mode.

Controls:
-AG 1 - lights
-pitch - forward/reverse
-roll - turn left/right
-slider 1 - push loaded modules forward with hydraulic pistons
-slider 2 - raise/lower vehicle chassis

How to use:
To move a module: after unloading a module from the ARTEMIS clear the transport ship away. Switch to module and lower the support struts with AG1. Switch to the CAV and lower the chassis low enough to get under the module (slow and careful to avoid hitting the struts). Then lift the module up. Drive the module over to where it’s getting connected to the colony. Once the docking port is close to the other docking port lower it just over the ground level. When it’s close enough the module will connect, then lower the chassis and back away. If the module is to far from the front of the CAV you can push it forward with slider 1.
You don’t have to worry about the cross beams, they will not hit any other parts.

Tips:
-slow and careful will win the day
-driving on low grav worlds is tricky and may take a little patience and practice.
-on low grav worlds the docking ports can be very aggressive. Do a quick save before connecting them. If parts break; reduce magnet on the two ports to be connected to around 60%. This will help prevent very aggressive connections, and stop parts from breaking.

I tested the entire system building a 12 module colony on Luna in my vanilla career game. It wasn’t overly difficult to do, but did take a little practice.