So if you can understand what I mean, whenever I want to place two engines on my upcoming Boeing Starliner I do what you are supposed to do: place a fuel adapter on the preferred part and then mirror it to Radial 2. But instead whenever I place the fuel adapter on it and go to symmetry, it says it must be connected to the SIDE of a rocket. Has anyone else been experiencing this? Also, this has been happening to me for a while now. For at least 3 months, whenever I enter the atmosphere, The heat shield gets to like over 1500 Celsius, but it doesn’t burn up? At least not on my iPad, whenever I re-enter the atmosphere on my iPhone, it burns up. Strange, have any suggestions on why this is happening?
Tags
Announcement14 Comments
- Log in to leave a comment
-
5,769 SelectAKey4.1 years ago
connect fuel adapter to side of tank, doesnt matter where. use symetry, add engine, then bump/rotate/move into position
-
-
10.1k Insanity+1 4.1 years ago
@ItsSimpleWhenYouRule then i cant help you sorry, about the reentry besides the settings being turned of i cant help you either, you might wanna report that bug.
-
-
-
4.1 years ago
@Insanity it isn’t connected to the bottom node so it should be a bug or something 🤔
-
4.1 years ago
@Insanity I want to put more than one engine on the bottom of the tank, like e.g. second stage has two or three engines.
-
10.1k Insanity+1 4.1 years ago
About the placement problem, make sure that the fuel adapter is connected to the surface of the fuel tank and not the bottom node, or symmetry won't work.
-
3,171 CASXA+1 4.1 years ago
@ItsSimpleWhenYouRule maybe to help ad a small rocket moter on the craft and fire it during reentry to slow the heating
-
4.1 years ago
@Dogfish5550 maybe but whenever I re-enter at the same velocity while on my phone it does
-
3,171 CASXA+1 4.1 years ago
The heat shield might be about to explode but cools down before it can.
-
-
No Upvotes
Log in in to upvote this post.
Don’t worry the problem was resolved just a bug.