Plane turns automatically on the runway while takeoff.
When the nose landing gear is removed , moves straight with no issues. Tried changing the gears , checked turn and motor input. Everything is fine.
Still it turns while on takeoff. Flys good and straight after takeoff and goes straight after landing as well.
Tags
Question7 Comments
- Log in to leave a comment
-
372 CloakPin9 months ago
@SC0693 what about front to rear weight?
Cantilevered weight over the front wheel can make take off sloppy -
400 Jerba9 months ago
I’ve had an issue with this using reverse tricycle gear (think bush planes, because that’s what it was). I have no clue what the issue was but I just put on a regular front gear and it worked ok. Make sure the front gear is infront of the COM, I think that’s what causes it but not sure
-
4 SC06939 months ago
@ChinmayShukla they're identical , also as I mentioned , this happens only on takeoff. During flight and on landing its fine
-
-
846 ChinmayShukla9 months ago
If your plane has 2 or more engines , check if all produce same thrust. Your craft might lean towards the side which produces less thrust
-
372 CloakPin9 months ago
Could be weight related.
Check to see if its heavier on one side more than the other.
2 Upvotes
Log in in to upvote this post.
This might be nose landing gear alignment, try to see if it’s center or not