EVEN MOAAAAR THRUSTERZ

Please read whole description before using this craft!!!

If you used previous version already, you will need to replace it with this one, sorry

---

V 2.0:

-Fixed atmospheric effects
-Fixed critical bug in the main program, which made RCS unusable after selecting "Cancel"

Watch this gif till the end👇

---

Do you like stock RCS exhaust? (YEAH AGAIN)
They're cool, but I better won't use it as classic RCS

That's why I brought to you pretty good auto RCS with Vizzy from GreenGalaxyAeroSpace

These RCS have 2 modes, which you can choose in flight: short ignitions(0.01 sec) and long ones (2 sec).
You can change time values between impulses in Vizzy.
And you can replace current program with lighter one, with only short burns

---

Installation to your craft is pretty simple:

1) you should resize all four engines (Main and three decor), so they will fit on your craft.
You can use both part resize, nozzle size and tinker panel.
Don't forget to put minus to the middle value in parts scale of the RCSdec3 (the one with small orange exhaust)

---

2)adjust decor engines position relative to "Main" engine, so exhaust will look good, and put them on their place

---

3) connect base part to monoprop fuel source

Note: you can freely change fuel type, exhaust should look the same

---

4)now go to Vizzy in EACH engine (Main and decor) and toggle Pitch, Roll, Yaw and translate inputs as you need.
Just put 0 to OFF and 1 to ON each of 6 inputs.
You can replace "Translate Forward" with "Throttle", or just put "+" between them if you need

---

5)put main program from the chip somewhere to your craft, so you will be able to control every thruster with just one AG.
You can rename thrusters as you want, but they should have "RCS" in the name (every 4 engines for EACH RCS), and rename other parts which you don't wanna use with these thrusters by just removing "RCS" part from their name

---

6)test your craft and change "Main" engine thrust, fuel flow rate and maximum number of ignitions on each RCS as you need via Hidden Properties:

---

After this you should be good.

Feel free to ask any questions here, I will answer them as soon as possible.

P.S. I would be really happy, if you will ping me in the comments under your crafts with these RCS, so I will just see them)

Video of tests:
HERE

---

Gallery

I recommend you to use stock RCS exhaust for reusable boosters, because their real exhaust looks like stock RCS in vacuum and on the sea level.

Otherwise you will get THAT👇

AND THAT