Your power settings are based off manifold pressure. I posted some settings on plaques inside the cockpit to help you out. 42 inches of Hg seems like a good power setting for takeoff when you don’t have added weight. 51 inches for takeoff If heavy. The F4u-1 had a relatively low manifold pressure compared to later models which could reach up to 70in/hg.
- updated propeller performance
- updated dry an wet weight
- now runs off jet fuel instead of battery, meaning aircraft weight will decrease as you burn fuel
- added wartime emergency power
- reworked airfoil characteristics
- added engine and contrail effects
- redesigned canopy
- rebuilt HVAR rockets with correct velocities
- reworked throttle binding to create smooth throttle scaling
- widened wings
If using additional wing mounted weapons or tanks, move them onto the wing using translate tool set to .5. They are already pre-connected. HVAR rockets are moved by grabbing front blue stud and moving that. Then go into VIZZY and connect line of code. They are labeled
Slider 1: elevator trim
Slider 2: fire weapons
Slider 3: aileron trim
8 Comments
- Log in to leave a comment
-
-
-
9,862 Jfranz16
@Scp09669 possibly. I’ve got a few others I’m currently working on but I can look into it after that
-
-
-
9,862 Jfranz16
@Livingg017 I built most of these a long time ago but I’m always messing with them to make them as close to flying the real thing as I can! I figured out how to do a few major upgrades which is why I’m uploading so much
-
I love your planes. By the way you should make an xb70