Pls someone help me, i test the rcs and the rotate things but how to make its work? I test rcs On default rocket and it didnt do anything even i active it and switch to mobile analog, same with hinge rotate
@Kell wow, i made it! didnt know tinker option before thx!
Turn on tinker panel and turn on hidden properties in that. @Dracozard
And how to binding rotate with "AG1"? I dont have that option.. Just slide 1, slide 2, etc for the axis
I’ll activate them just a precautionary but yeah that seems logical @Kell
RCS thrusters do not need the fuel tanks between them and the monopropellant tanks to have fuel line on. They drain monopropellant from tanks that are anywhere. @ColonelStriker @Dracozard
Damn... U right... I didnt know it need diff fuel... Thx for help
Maybe you don’t have any fuel for it. Try enabling a fuel line of a fuel tank and switching said fuel tank’s fuel from whatever to monopropellant
@ColonelStriker so rcs only work when no air available? I tried to control it in training docking, but when i make it in New plane it not work Just like dead device, any toritorial for it?
RCS, or Reaction Control System essentially works as an orientation device when there is no air available for the control surfaces to act upon, or when air is insufficient to make their control surfaces to move. However the more known use is to orient spacecrafts in space in a more precise manner compared to them main engines. Sometimes you want to finely control a craft, especially in docking.
The two operations of RCS in SR2 as far as I know are the regular and translation mode. In the regular, pitch is pitch, roll is roll, Yaw is Yaw. But in translation, the craft essentially keeps its bearings while it moves in an XYZ plane. Pitch becomes forward/backward, Roll is side to side, Yaw is up and down