This will calculate and time warp you to the optimal time to perform a transfer between your current planet and the targeted planet. You must setup your own burn.
Target another planet and press AG1 to calculate the transfer window, then enter your selection for timewarp.
Version 2 uses a more robust algorithm and works with highly eccentric planets and comets. It also improved the UI so its easier to understand what is happening.
FLASHING LIGHTS during Time Warp
GENERAL INFO
- Successors 1 craft(s) +35 bonus
- Created On: Windows
- Game Version: 0.9.802.0
- Price: $50k
- Number of Parts: 1
- Dimensions: 0 m x 1 m x 1 m
PERFORMANCE
- Total Delta V: 0m/s
- Total Thrust: 0N
- Engines: 0
- Wet Mass: 20kg
- Dry Mass: 20kg
STAGES
| Stage | Engines | Delta V | Thrust | Burn | Mass |
|---|
13 Comments
- Log in to leave a comment
-
18.7k GoldenShadowGS1.9 years ago
@AstronX It requires you to set the vizzy instructions per frame higher than the default, Try a value of 5,000. if you copied the program to a different part. The default value takes too long and it can get stuck trying to update because the planets are moving as its calculating.
-
-
-
-
11.6k lordvader02192.4 years ago
@GoldenShadowGS I’m getting an execution engine exception. In other words, this program only runs on PC.
-
-
-
137 Matteovir+2 2.4 years ago
@GoldenShadowGS
Thanks! it work perfectly! i was able to perform a launch in a perfect window for a Venus-Venus gravity assist for a smooth low delta-V Venus orbit insertion with a 1N Ion engine. great!
Are you planning to program also a correct launch azimuth calculator for interplanetary transfer?
thanks -
-
-
18.7k GoldenShadowGS+4 2.4 years ago
@Matteovir AG can be changed by editing a single variable in vizzy. You can copy the program off the chip and import it to any part.
-
137 Matteovir+2 2.4 years ago
@GoldenShadowGS
Wow! thanks for the enormous work.
If i may ask,
1) is there a way to change the AG to activate the algorythm?
2) do i need to use this very chip or it is enough to save the program and import it in another chip?
thanks a lot!
@GoldenShadowGS Hello there. I tried this with a chip and battery and it works. But when I copy the program to my command chip it doesn't as you described. Can you please guide me on how to set the Vizzy instructions per frame higher (I'm a total noob here =) ).